Cranbrook, British Columbia, (Newsfile Corp.–Feb 16, 2021)– DLP Resources Inc. (TSXV:DLP) is pleased to announce that the drilling of the Gerry Vent target on the DD Property has commenced (Figure 1). Hole DD21-01 will be drilled to test the MT resistivity anomaly which coincides with the known mapped surface outcrop of albite, actinolite and tourmaline alteration within a breccia extending over an area of approximately 400m x 100m. Visible mineralization of sphalerite (Zn) and galena (Pb) occurs within the breccia.
The depth of the Sullivan-type Zn-Pb-Ag target zone is between 300 to 600m below surface where a strong conductive body is identified by a magnetotelluric (MT) resistivity anomaly of between 20- and 60-ohm metres (Figures 1 and 2).
Ian Gendall, President of DLP commented: “We are excited to start drilling the many encouraging MT targets reported in early December 2020 (News Release – December 03, 2020, see Figures 3 and 4). We will be targeting the Gerry Vent area to start with, and two holes are planned for the winter program. The Gerry Vent has a shallow Zn-Pb-Ag target zone which is developed within the Middle Aldridge Formation and extends to the NE where we plan to drill a second hole”.
David L. Pighin, consulting geologist and co-founder of DLP Resources, is the qualified person (“QP”) of the Corporation as defined by National Instrument 43-101. Mr. Pighin has reviewed and approved the technical contents of this news release.
Figure 1: Titan MT resistivity plan at 1000m elevation with DD21-01 on the Gerry Vent.
Figure 2: Titan MT resistivity section along Line 5N showing the 2021 drill hole DD21-01 targeting the Gerry Vent.
Figure 3: Titan MT resistivity plan at 0m elevation with planned drill holes.
Figure 4: Simplified plan showing MT anomalies at 0m elevation on the DD-Moby Dick and NZOU Properties and DD21-01 drill hole
About DLP Resources Inc.
DLP Resources Inc. is a mineral exploration company operating in Southeastern British Columbia, exploring for Base Metals and Cobalt. DLP is listed on the TSX-V, trading symbol DLP. Please refer to our web site www.dlpresourcesinc.com for additional information.
FOR FURTHER INFORMATION PLEASE CONTACT: DLP Resources Inc.
Ian Gendall, President
Jim Stypula, Chief Executive Officer
Robin Sudo, Chief Financial Officer and Corporate Secretary
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
This News Release contains forward-looking statements. Forward looking statements are statements which relate to future events. Forward-looking statements include, but are not limited to, statements with respect to exploration results, the success of exploration activities, mine development prospects, completion of economic assessments, and future gold production. In some cases, you can identify forward-looking statements by terminology such as “may”, “appears to”, “should”, “expects”, “plans”, “anticipates”, believes”, “estimates”, “predicts”, “potential”, or “continue” or the negative of these terms or other comparable terminology. These statements are only predictions and involve known and unknown risks, uncertainties and other factors that may cause our actual results, level of activity, performance or achievements to be materially different from any future results, levels of activity, performance, or achievements expressed or implied by these forward-looking-statements.
Although DLP has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking statements, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be no assurance that forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements.